Interpretation of maintenance and maintenance of high frequency welded pipe unit

1. Follow operating procedures strictly.

In the process of use High Frequency Welded Pipe Machine, we must strictly operate according to the operating procedures in the instruction manual, not to overload and operate the machine, and to check the machinery before complaining about production or mechanical operation. Whether the parts can work normally, whether there is any fault, only when the various parts and indicators of the machine are normal, the machine can be started up and put into production, otherwise it will cause mechanical loss.

2. Check machine before operation

After checking the various components of the high-frequency welded pipe machine.we will start up and operate again. In the production process of the machine, we must ensure the temperature of the machine and the stability of the production. If the machine fails, it must be timely. Stop production and check what is wrong with the machine to avoid further damage. The main faults include unstable mechanical operation, grinding of the machine, and abnormal noise during operation. If problems occur, they should be checked in time.

3.maintance regularly.

After the High Frequency Welded Pipe Machine has been used for a period of time, we must pay attention to regular lubrication and cleaning of the machine to ensure that the machine is clean. Only then can the machine run normally and be lighter during use. Parts that are aging must be replaced in time to ensure that the machine can operate normally at any time. There is also a high-frequency welded pipe unit that should be kept well when the machine is not suitable for use.